|
|
| Sətir 1: |
Sətir 1: |
| | + | [[Kateqoriya:{{padleft:|1|{{PAGENAME}}}}]][[Kateqoriya:Şəxslər (familiya sırası ilə)|{{Əvvəlcə familiya|{{PAGENAME}}}}]]{{Şəxs |
| | + | |Adı = Nəbiyyə Əbdürrəhmanova |
| | + | |Tam adı = Əbdürrəhmanova Nəbiyyə Adışirin qızı |
| | + | |Piktoqram = bio <!--“bio” sözünü yazar, kitab, diplomat, filosof, newspaper, riyaziyyat, fizika, kimya, biologiya, tibb, tarix, arxeologiya və musiqi və s. variantlarından (bütün variantlar burada: [[Şəki Ensiklopediyası:Layihə/Piktoqramlar]]) hər hansı biri ilə əvəz edə bilərsiniz--> |
| | + | |Şəkil = Nəbiyyə Abdurahmanova.png |
| | + | |Şəklin ölçüsü = |
| | + | |Şəklin izahı = Nəbiyyə Əbdürrəhmanova. |
| | + | |Digər adı = |
| | + | |Doğum tarixi = {{Doğum tarixi|1924|8|13}} |
| | + | |Doğum yeri = [[Nuxa]] (indiki Şəki), {{AzSSR}}, {{ZSFSR}} |
| | + | |Vəfat tarixi = {{Vəfat tarixi|1993| | }} |
| | + | |Vəfat yeri = [[Şəki]], {{AZE}} |
| | + | |Vəfat səbəbi = |
| | + | |Dəfn yeri = Məhəmməd əfəndi qəbiristanlığı, [[Şəki]] |
| | + | |Vətəndaşlığı = {{SSRİ}}→{{AZE}} |
| | + | |Həyat yoldaşı = Rəcəb Ağayev |
| | + | |Uşağı = |
| | + | |Partnyoru = |
| | + | |Atası = |
| | + | |Anası = |
| | + | |Milliyəti = |
| | + | |Dini = |
| | + | |İxtisası = |
| | + | |Təhsili = {{*}}[[Nuxa Dövlət Müəllimlər İnstitutu]], tarix şöbəsi (1948–1950) |
| | | | |
| − | --[[--------------------------< F O R W A R D D E C L A R A T I O N S >-------------------------------------- | + | {{*}}Azərbaycan Müəllimləri Təkmilləşdirə İnstitutu, tarix fakültəsi, qiyabi (1958–1964) |
| − | ]] | + | |Fəaliyyəti = |
| | + | |Fəaliyyət illəri = |
| | + | |Tanınır = |
| | + | |Mükafatları = |
| | + | |Adının digər versiyası = <!--Burada şəxsin ad və familiyasının digər yazılış formaları göstərilməlidir; Məsələn, şəxsin adı ''Məmməd Əliyev''dirsə, bura '''Memmed Eliyev''', Mammad Aliyev və s. bu kimi adlar yazmaq olar. Çünki internetdə axtarış edilərkən, çox vaxt ingilis əlifbasında olmayan hərflərin (ə, ü, ö və s.) əvəzinə başqa hərflər yazılır -->Nəbiyyə Abdurahmanova, Nebiyye Abdurahmanova, Nabiyya Abdurahmanova, Нәбијјә Әбдүррәһманова |
| | + | |İmzası = |
| | + | |Saytı = |
| | + | |Commons = |
| | + | }} |
| | + | '''Nəbiyyə Əbdürrəhmanova''' (1929–1993) — sovet dövründə [[Şəki|Şəkidə]] tanınmış partiya işçisi olmuş qadın. 4, 5, 6 və 8-ci çağırış şəhər sovetinin deputatı seçilmişdir. |
| | | | |
| − | local is_set, in_array; -- imported functions from selected Module:Citation/CS1/Utilities
| + | ==Haqqında məlumatlar== |
| − | local cfg; -- table of tables imported from selected Module:Citation/CS1/Configuration
| + | 13 avqust 1924-cü il tarixdə [[Nuxa|Nuxada]] (indiki Şəki) anadan olub. |
| | | | |
| | + | ===Təhsili=== |
| | + | Nuxa şəhər 5 №-li məktəbini və [[Nuxa Pedaqoji Texnikumu|Nuxa Pedaqoji Texnikumunu]] bitirib. |
| | | | |
| − | --[=[-------------------------< I S _ V A L I D _ A C C E S S D A T E >---------------------------------------- | + | 1948 – 1950-ci illərdə ikiillik [[Nuxa Dövlət Müəllimlər İnstitutu|Nuxa Dövlət Müəllimlər İnstitutunun]] tarix şöbəsində, |
| | | | |
| − | returns true if:
| + | 1958 – 1964-cü illərdə Azərbaycan Müəllimləri Təkmilləşdirə İnstitutunun tarix fakültəsində təhsil alıb. |
| − | Wikipedia start date <= accessdate < today + 2 days
| |
| | | | |
| − | Wikipedia start date is 2001-01-15T00:00:00 UTC which is 979516800 seconds after 1970-01-01T00:00:00 UTC (the start of Unix time)
| + | ===Əmək fəaliyyəti=== |
| − | accessdate is the date provided in |accessdate= at time 00:00:00 UTC
| + | Nuxa Pedaqoji Texnikumunu bitirdikdən sonra bir müddət komsomol təşkilatında müxtəlif vəzifələrdə çalışıb. |
| − | today is the current date at time 00:00:00 UTC plus 48 hours
| |
| − | if today is 2015-01-01T00:00:00 then
| |
| − | adding 24 hours gives 2015-01-02T00:00:00 – one second more than today
| |
| − | adding 24 hours gives 2015-01-03T00:00:00 – one second more than tomorrow
| |
| | | | |
| − | This function does not work if it is fed month names for languages other than English. Wikimedia #time: parser
| + | 1950-ci ildən isə Azərbaycan {{KP}} Nuxa rayon partiya komitəsinin təbliğat və təşviqat şöbəsinin təlimatçısı olub. |
| − | apparently doesn't understand non-Engish date month names. This function will always return false when the date
| |
| − | contains a non-English month name because good1 is false after the call to lang.formatDate(). To get around that
| |
| − | call this function with YYYY-MM-DD format dates.
| |
| | | | |
| − | ]=]
| + | 1983-cü ildə təqaüdə çıxıb. |
| | | | |
| − | local function is_valid_accessdate (accessdate)
| + | ===İctimai-siyasi aktivliyi=== |
| − | local lang = mw.getContentLanguage();
| + | [[Nuxa rayon və şəhər sovetlərinin deputatları (1951)|1951]], [[Nuxa rayon və şəhər sovetlərinin deputatları (1953)|1953]], [[Nuxa rayon və şəhər sovetlərinin deputatları (1955)|1955]] və [[Nuxa rayon və şəhər sovetlərinin deputatları (1959)|1959-cu]] illərdə Nuxa şəhər Sovetinin deputatı seçilib. |
| − | local good1, good2;
| |
| − | local access_ts, tomorrow_ts; -- to hold unix time stamps representing the dates
| |
| − |
| |
| − | good1, access_ts = pcall( lang.formatDate, lang, 'U', accessdate ); -- convert accessdate value to unix timesatmp
| |
| − | good2, tomorrow_ts = pcall( lang.formatDate, lang, 'U', 'today + 2 days' ); -- today midnight + 2 days is one second more than all day tomorrow
| |
| − |
| |
| − | if good1 and good2 then -- lang.formatDate() returns a timestamp in the local script which which tonumber() may not understand
| |
| − | access_ts = tonumber (access_ts) or lang:parseFormattedNumber (access_ts); -- convert to numbers for the comparison;
| |
| − | tomorrow_ts = tonumber (tomorrow_ts) or lang:parseFormattedNumber (tomorrow_ts);
| |
| − | else
| |
| − | return false; -- one or both failed to convert to unix time stamp
| |
| − | end
| |
| | | | |
| − | if 979516800 <= access_ts and access_ts < tomorrow_ts then -- Wikipedia start date <= accessdate < tomorrow's date
| + | ===Vəfatı=== |
| − | return true;
| + | 1993-cü ildə Şəkidə vəfat edib. Məhəmməd əfəndi qəbiristanlığında dəfn olunub. |
| − | else
| |
| − | return false; -- accessdate out of range
| |
| − | end
| |
| − | end
| |
| | | | |
| | + | {{Yoxlanılmış məqalə}} |
| | | | |
| − | --[[--------------------------< G E T _ M O N T H _ N U M B E R >----------------------------------------------
| + | {{Çapa hazır məqalə}} |
| − | | |
| − | returns a number according to the month in a date: 1 for January, etc. Capitalization and spelling must be correct. If not a valid month, returns 0
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function get_month_number (month)
| |
| − | return cfg.date_names['local'].long[month] or cfg.date_names['local'].short[month] or -- look for local names first
| |
| − | cfg.date_names['en'].long[month] or cfg.date_names['en'].short[month] or -- failing that, look for English names
| |
| − | 0; -- not a recognized month name
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ V A L I D _ E M B A R G O _ D A T E >------------------------------------
| |
| − | | |
| − | returns true and date value if that value has proper dmy, mdy, ymd format.
| |
| − | | |
| − | returns false and 9999 (embargoed forever) when date value is not proper format; assumes that when |embargo= is
| |
| − | set, the editor intended to embargo a pmc but |embargo= does not hold a single date.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function is_valid_embargo_date (v)
| |
| − | if v:match ('^%d%d%d%d%-%d%d%-%d%d$') or -- ymd
| |
| − | v:match ('^%d%d?%s+%a+%s+%d%d%d%d$') or -- dmy
| |
| − | v:match ('^%a+%s+%d%d?%s*,%s*%d%d%d%d$') then -- mdy
| |
| − | return true, v;
| |
| − | end
| |
| − | return false, '9999'; -- if here not good date so return false and set embargo date to long time in future
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< G E T _ S E A S O N _ N U M B E R >--------------------------------------------
| |
| − | | |
| − | returns a number according to the sequence of seasons in a year: 1 for Winter, etc. Capitalization and spelling must be correct. If not a valid season, returns 0
| |
| − | | |
| − | Uses ISO DIS 8601 2016 part 2 §4.7 Divisions of a year for hemishpere-independent seasons:
| |
| − | 21-24 = Spring, Summer, Autumn, Winter, independent of “Hemisphere”
| |
| − | | |
| − | These additional divisions not currently supported:
| |
| − | 25-28 = Spring - Northern Hemisphere, Summer- Northern Hemisphere, Autumn - Northern Hemisphere, Winter - Northern Hemisphere
| |
| − | 29-32 = Spring – Southern Hemisphere, Summer– Southern Hemisphere, Autumn – Southern Hemisphere, Winter - Southern Hemisphere
| |
| − | 33-36 = Quarter 1, Quarter 2, Quarter 3, Quarter 4 (3 months each)
| |
| − | 37-39 = Quadrimester 1, Quadrimester 2, Quadrimester 3 (4 months each)
| |
| − | 40-41 = Semestral 1, Semestral-2 (6 months each)
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function get_season_number (season)
| |
| − | return cfg.date_names['local'].season[season] or -- look for local names first
| |
| − | cfg.date_names['en'].season[season] or -- failing that, look for English names
| |
| − | 0; -- not a recognized season name
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ P R O P E R _ N A M E >--------------------------------------------------
| |
| − | | |
| − | returns a non-zero number if date contains a recognized proper name. Capitalization and spelling must be correct.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function is_proper_name (name)
| |
| − | return cfg.date_names['local'].named[name] or -- look for local names dates first
| |
| − | cfg.date_names['en'].named[name] or -- failing that, look for English names
| |
| − | 0; -- not a recognized named date
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ V A L I D _ M O N T H _ O R _ S E A S O N >------------------------------
| |
| − | | |
| − | --returns true if month or season is valid (properly spelled, capitalized, abbreviated)
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function is_valid_month_or_season (month_season)
| |
| − | if 0 == get_month_number (month_season) then -- if month text isn't one of the twelve months, might be a season
| |
| − | if 0 == get_season_number (month_season) then -- not a month, is it a season?
| |
| − | return false; -- return false not a month or one of the five seasons
| |
| − | end
| |
| − | end
| |
| − | return true;
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ V A L I D _ Y E A R >----------------------------------------------------
| |
| − | | |
| − | Function gets current year from the server and compares it to year from a citation parameter. Years more than one year in the future are not acceptable.
| |
| − | | |
| − | ]]
| |
| − | local year_limit;
| |
| − | local function is_valid_year(year)
| |
| − | if not is_set(year_limit) then
| |
| − | year_limit = tonumber(os.date("%Y"))+1; -- global variable so we only have to fetch it once
| |
| − | end
| |
| − | return tonumber(year) <= year_limit; -- false if year is in the future more than one year
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ V A L I D _ D A T E >----------------------------------------------------
| |
| − | Returns true if day is less than or equal to the number of days in month and year is no farther into the future
| |
| − | than next year; else returns false.
| |
| − | | |
| − | Assumes Julian calendar prior to year 1582 and Gregorian calendar thereafter. Accounts for Julian calendar leap
| |
| − | years before 1582 and Gregorian leap years after 1582. Where the two calendars overlap (1582 to approximately
| |
| − | 1923) dates are assumed to be Gregorian.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function is_valid_date (year, month, day)
| |
| − | local days_in_month = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
| |
| − | local month_length;
| |
| − | if not is_valid_year(year) then -- no farther into the future than next year
| |
| − | return false;
| |
| − | end
| |
| − |
| |
| − | month = tonumber(month); -- required for YYYY-MM-DD dates
| |
| − |
| |
| − | if (2==month) then -- if February
| |
| − | month_length = 28; -- then 28 days unless
| |
| − | if 1582 > tonumber(year) then -- Julian calendar
| |
| − | if 0==(year%4) then -- is a leap year?
| |
| − | month_length = 29; -- if leap year then 29 days in February
| |
| − | end
| |
| − | else -- Gregorian calendar
| |
| − | if (0==(year%4) and (0~=(year%100) or 0==(year%400))) then -- is a leap year?
| |
| − | month_length = 29; -- if leap year then 29 days in February
| |
| − | end
| |
| − | end
| |
| − | else
| |
| − | month_length=days_in_month[month];
| |
| − | end
| |
| − | | |
| − | if tonumber (day) > month_length then
| |
| − | return false;
| |
| − | end
| |
| − | return true;
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ V A L I D _ M O N T H _ R A N G E _ S T Y L E >--------------------------
| |
| − | | |
| − | Months in a range are expected to have the same style: Jan–Mar or October–December but not February–Mar or Jul–August.
| |
| − | There is a special test for May because it can be either short or long form.
| |
| − | | |
| − | Returns true when style for both months is the same
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function is_valid_month_range_style (month1, month2)
| |
| − | local len1 = month1:len();
| |
| − | local len2 = month2:len();
| |
| − | if len1 == len2 then
| |
| − | return true; -- both months are short form so return true
| |
| − | elseif 'May' == month1 or 'May'== month2 then
| |
| − | return true; -- both months are long form so return true
| |
| − | elseif 3 == len1 or 3 == len2 then
| |
| − | return false; -- months are mixed form so return false
| |
| − | else
| |
| − | return true; -- both months are long form so return true
| |
| − | end
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< I S _ V A L I D _ M O N T H _ S E A S O N _ R A N G E >------------------------
| |
| − | | |
| − | Check a pair of months or seasons to see if both are valid members of a month or season pair.
| |
| − | | |
| − | Month pairs are expected to be left to right, earliest to latest in time.
| |
| − | | |
| − | All season ranges are accepted as valid because there are publishers out there who have published a Summer–Spring YYYY issue so ... ok
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function is_valid_month_season_range(range_start, range_end)
| |
| − | local range_start_number = get_month_number (range_start);
| |
| − | local range_end_number;
| |
| − |
| |
| − | if 0 == range_start_number then -- is this a month range?
| |
| − | range_start_number = get_season_number (range_start); -- not a month; is it a season? get start season number
| |
| − | range_end_number = get_season_number (range_end); -- get end season number
| |
| − | | |
| − | if (0 ~= range_start_number) and (0 ~= range_end_number) then
| |
| − | return true; -- any season pairing is accepted
| |
| − | end
| |
| − | return false; -- range_start and/or range_end is not a season
| |
| − | end
| |
| − | -- here when range_start is a month
| |
| − | range_end_number = get_month_number (range_end); -- get end month number
| |
| − | if range_start_number < range_end_number then -- range_start is a month; does range_start precede range_end?
| |
| − | if is_valid_month_range_style (range_start, range_end) then -- do months have the same style?
| |
| − | return true; -- proper order and same style
| |
| − | end
| |
| − | end
| |
| − | return false; -- range_start month number is greater than or equal to range end number; or range end isn't a month
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< M A K E _ C O I N S _ D A T E >------------------------------------------------
| |
| − | | |
| − | This function receives a table of date parts for one or two dates and an empty table reference declared in
| |
| − | Module:Citation/CS1. The function is called only for |date= parameters and only if the |date=<value> is
| |
| − | determined to be a valid date format. The question of what to do with invalid date formats is not answered here.
| |
| − | | |
| − | The date parts in the input table are converted to an ISO 8601 conforming date string:
| |
| − | single whole dates: yyyy-mm-dd
| |
| − | month and year dates: yyyy-mm
| |
| − | year dates: yyyy
| |
| − | ranges: yyyy-mm-dd/yyyy-mm-dd
| |
| − | yyyy-mm/yyyy-mm
| |
| − | yyyy/yyyy
| |
| − | | |
| − | Dates in the Julian calendar are reduced to year or year/year so that we don't have to do calendar conversion from
| |
| − | Julian to Proleptic Gregorian.
| |
| − | | |
| − | The input table has:
| |
| − | year, year2 – always present; if before 1582, ignore months and days if present
| |
| − | month, month2 – 0 if not provided, 1-12 for months, 21-24 for seasons; 99 Christmas
| |
| − | day, day2 – 0 if not provided, 1-31 for days
| |
| − |
| |
| − | the output table receives:
| |
| − | rftdate: an IS8601 formatted date
| |
| − | rftchron: a free-form version of the date, usually without year which is in rftdate (season ranges and propername dates)
| |
| − | rftssn: one of four season keywords: winter, spring, summer, fall (lowercase)
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function make_COinS_date (input, tCOinS_date)
| |
| − | local date; -- one date or first date in a range
| |
| − | local date2 = ''; -- end of range date
| |
| − | -- start temporary Julian / Gregorian calendar uncertainty detection
| |
| − | local year = tonumber(input.year); -- this temporary code to determine the extent of sources dated to the Julian/Gregorian
| |
| − | local month = tonumber(input.month); -- interstice 1 October 1582 – 1 January 1926
| |
| − | local day = tonumber (input.day);
| |
| − | if (0 ~= day) and -- day must have a value for this to be a whole date
| |
| − | (((1582 == year) and (10 <= month) and (12 >= month)) or -- any whole 1582 date from 1 october to 31 December or
| |
| − | ((1926 == year) and (1 == month) and (1 == input.day)) or -- 1 January 1926 or
| |
| − | ((1582 < year) and (1925 >= year))) then -- any date 1 January 1583 – 31 December 1925
| |
| − | tCOinS_date.inter_cal_cat = true; -- set category flag true
| |
| − | end
| |
| − | -- end temporary Julian / Gergorian calendar uncertainty detection
| |
| − |
| |
| − | if 1582 > tonumber(input.year) or 20 < tonumber(input.month) then -- Julian calendar or season so &rft.date gets year only
| |
| − | date = input.year;
| |
| − | if 0 ~= input.year2 and input.year ~= input.year2 then -- if a range, only the second year portion when not the same as range start year
| |
| − | date = string.format ('%.4d/%.4d', tonumber(input.year), tonumber(input.year2)) -- assemble the date range
| |
| − | end
| |
| − | if 20 < tonumber(input.month) then -- if season or propername date
| |
| − | local season = {[24]='winter', [21]='spring', [22]='summer', [23]='fall', [99]='Christmas'}; -- seasons lowercase, no autumn; proper names use title case
| |
| − | if 0 == input.month2 then -- single season date
| |
| − | if 30 <tonumber(input.month) then
| |
| − | tCOinS_date.rftchron = season[input.month]; -- proper name dates
| |
| − | else
| |
| − | tCOinS_date.rftssn = season[input.month]; -- seasons
| |
| − | end
| |
| − | else -- season range with a second season specified
| |
| − | if input.year ~= input.year2 then -- season year – season year range or season year–year
| |
| − | tCOinS_date.rftssn = season[input.month]; -- start of range season; keep this?
| |
| − | if 0~= input.month2 then
| |
| − | tCOinS_date.rftchron = string.format ('%s %s – %s %s', season[input.month], input.year, season[input.month2], input.year2);
| |
| − | end
| |
| − | else -- season–season year range
| |
| − | tCOinS_date.rftssn = season[input.month]; -- start of range season; keep this?
| |
| − | tCOinS_date.rftchron = season[input.month] .. '–' .. season[input.month2]; -- season–season year range
| |
| − | end
| |
| − | end
| |
| − | end
| |
| − | tCOinS_date.rftdate = date;
| |
| − | return; -- done
| |
| − | end
| |
| − |
| |
| − | if 0 ~= input.day then
| |
| − | date = string.format ('%s-%.2d-%.2d', input.year, tonumber(input.month), tonumber(input.day)); -- whole date
| |
| − | elseif 0 ~= input.month then
| |
| − | date = string.format ('%s-%.2d', input.year, tonumber(input.month)); -- year and month
| |
| − | else
| |
| − | date = string.format ('%s', input.year); -- just year
| |
| − | end
| |
| − | | |
| − | if 0 ~= input.year2 then
| |
| − | if 0 ~= input.day2 then
| |
| − | date2 = string.format ('/%s-%.2d-%.2d', input.year2, tonumber(input.month2), tonumber(input.day2)); -- whole date
| |
| − | elseif 0 ~= input.month2 then
| |
| − | date2 = string.format ('/%s-%.2d', input.year2, tonumber(input.month2)); -- year and month
| |
| − | else
| |
| − | date2 = string.format ('/%s', input.year2); -- just year
| |
| − | end
| |
| − | end
| |
| − |
| |
| − | tCOinS_date.rftdate = date .. date2; -- date2 has the '/' separator
| |
| − | return;
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< P A T T E R N S >--------------------------------------------------------------
| |
| − | | |
| − | this is the list of patterns for date formats that this module recognizes. Approximately the first half of these
| |
| − | patterns represent formats that might be reformatted into another format. Those that might be reformatted have
| |
| − | 'indicator' letters that identify the content of the matching capture: 'd' (day), 'm' (month), 'a' (anchor year),
| |
| − | 'y' (year); second day, month, year have a '2' suffix.
| |
| − | | |
| − | These patterns are used for both date validation and for reformatting. This table should not be moved to ~/Configuration
| |
| − | because changes to this table require changes to check_date() and to reformatter() and reformat_date()
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local patterns = {
| |
| − | -- year-initial numerical year-month-day
| |
| − | ['ymd'] = {'^(%d%d%d%d)%-(%d%d)%-(%d%d)$', 'y', 'm', 'd'},
| |
| − | -- month-initial: month day, year
| |
| − | ['Mdy'] = {'^(%D-) +([1-9]%d?), +((%d%d%d%d?)%a?)$', 'm', 'd', 'a', 'y'},
| |
| − | -- month-initial day range: month day–day, year; days are separated by endash
| |
| − | ['Md-dy'] = {'^(%D-) +([1-9]%d?)[%-–]([1-9]%d?), +((%d%d%d%d)%a?)$', 'm', 'd', 'd2', 'a', 'y'},
| |
| − | -- day-initial: day month year
| |
| − | ['dMy'] = {'^([1-9]%d?) *(%D-) +((%d%d%d%d?)%a?)$', 'd', 'm', 'a', 'y'},
| |
| − | -- year-initial: year month day; day: 1 or 2 two digits, leading zero allowed; not supported at en.wiki
| |
| − | -- ['yMd'] = {'^((%d%d%d%d?)%a?) +(%D-) +(%d%d?)$', 'a', 'y', 'm', 'd'},
| |
| − | -- day-range-initial: day–day month year; days are separated by endash
| |
| − | ['d-dMy'] = {'^([1-9]%d?)[%-–]([1-9]%d?) +(%D-) +((%d%d%d%d)%a?)$', 'd', 'd2', 'm', 'a', 'y'},
| |
| − | -- day initial month-day-range: day month - day month year; uses spaced endash
| |
| − | ['dM-dMy'] = {'^([1-9]%d?) +(%D-) +[%-–] +([1-9]%d?) +(%D-) +((%d%d%d%d)%a?)$', 'd', 'm', 'd2', 'm2', 'a', 'y'},
| |
| − | -- month initial month-day-range: month day – month day, year; uses spaced endash
| |
| − | ['Md-Mdy'] = {'^(%D-) +([1-9]%d?) +[%-–] +(%D-) +([1-9]%d?), +((%d%d%d%d)%a?)$','m', 'd', 'm2', 'd2', 'a', 'y'},
| |
| − | -- day initial month-day-year-range: day month year - day month year; uses spaced endash
| |
| − | ['dMy-dMy'] = {'^([1-9]%d?) +(%D-) +(%d%d%d%d) +[%-–] +([1-9]%d?) +(%D-) +((%d%d%d%d)%a?)$', 'd', 'm', 'y', 'd2', 'm2', 'a', 'y2'},
| |
| − | -- month initial month-day-year-range: month day, year – month day, year; uses spaced endash
| |
| − | ['Mdy-Mdy'] = {'^(%D-) +([1-9]%d?), +(%d%d%d%d) +[%-–] +(%D-) +([1-9]%d?), +((%d%d%d%d)%a?)$', 'm', 'd', 'y', 'm2', 'd2', 'a', 'y2'},
| |
| − | | |
| − | -- these date formats cannot be converted, per se, but month name can be rendered short or long
| |
| − | -- month/season year - month/season year; separated by spaced endash
| |
| − | ['My-My'] = {'^(%D-) +(%d%d%d%d) +[%-–] +(%D-) +((%d%d%d%d)%a?)$', 'm', 'y', 'm2', 'a', 'y2'},
| |
| − | -- month/season range year; months separated by endash
| |
| − | ['M-My'] = {'^(%D-)[%-–](%D-) +((%d%d%d%d)%a?)$', 'm', 'm2', 'a', 'y'},
| |
| − | -- month/season year or proper-name year
| |
| − | ['My'] = {'^([^%d–]-) +((%d%d%d%d)%a?)$', 'm', 'a', 'y'}, -- this way because endash is a member of %D; %D- will match January–March 2019 when it shouldn't
| |
| − | -- these date formats cannot be converted
| |
| − | ['Sy4-y2'] = {'^(%D-) +((%d%d)%d%d)[%-–]((%d%d)%a?)$'}, -- special case Winter/Summer year-year (YYYY-YY); year separated with unspaced endash
| |
| − | ['Sy-y'] = {'^(%D-) +(%d%d%d%d)[%-–]((%d%d%d%d)%a?)$'}, -- special case Winter/Summer year-year; year separated with unspaced endash
| |
| − | ['y-y'] = {'^(%d%d%d%d?)[%-–]((%d%d%d%d?)%a?)$'}, -- year range: YYY-YYY or YYY-YYYY or YYYY–YYYY; separated by unspaced endash; 100-9999
| |
| − | ['y4-y2'] = {'^((%d%d)%d%d)[%-–]((%d%d)%a?)$'}, -- year range: YYYY–YY; separated by unspaced endash
| |
| − | ['y'] = {'^((%d%d%d%d?)%a?)$'}, -- year; here accept either YYY or YYYY
| |
| − | }
| |
| − | | |
| − | | |
| − | --[[--------------------------< C H E C K _ D A T E >----------------------------------------------------------
| |
| − | | |
| − | Check date format to see that it is one of the formats approved by WP:DATESNO or WP:DATERANGE. Exception: only
| |
| − | allowed range separator is endash. Additionally, check the date to see that it is a real date: no 31 in 30-day
| |
| − | months; no 29 February when not a leap year. Months, both long-form and three character abbreviations, and seasons
| |
| − | must be spelled correctly. Future years beyond next year are not allowed.
| |
| − | | |
| − | If the date fails the format tests, this function returns false and does not return values for anchor_year and
| |
| − | COinS_date. When this happens, the date parameter is used in the COinS metadata and the CITEREF identifier gets
| |
| − | its year from the year parameter if present otherwise CITEREF does not get a date value.
| |
| − | | |
| − | Inputs:
| |
| − | date_string - date string from date-holding parameters (date, year, accessdate, embargo, archivedate, etc.)
| |
| − | | |
| − | Returns:
| |
| − | false if date string is not a real date; else
| |
| − | true, anchor_year, COinS_date
| |
| − | anchor_year can be used in CITEREF anchors
| |
| − | COinS_date is ISO 8601 format date; see make_COInS_date()
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function check_date (date_string, tCOinS_date, test_accessdate)
| |
| − | local year; -- assume that year2, months, and days are not used;
| |
| − | local year2=0; -- second year in a year range
| |
| − | local month=0;
| |
| − | local month2=0; -- second month in a month range
| |
| − | local day=0;
| |
| − | local day2=0; -- second day in a day range
| |
| − | local anchor_year;
| |
| − | local coins_date;
| |
| − | | |
| − | if date_string:match (patterns['ymd'][1]) then -- year-initial numerical year month day format
| |
| − | year, month, day=date_string:match (patterns['ymd'][1]);
| |
| − | if 12 < tonumber(month) or 1 > tonumber(month) or 1582 > tonumber(year) or 0 == tonumber(day) then return false; end -- month or day number not valid or not Gregorian calendar
| |
| − | anchor_year = year;
| |
| − |
| |
| − | elseif mw.ustring.match(date_string, patterns['Mdy'][1]) then -- month-initial: month day, year
| |
| − | month, day, anchor_year, year=mw.ustring.match(date_string, patterns['Mdy'][1]);
| |
| − | month = get_month_number (month);
| |
| − | if 0 == month then return false; end -- return false if month text isn't one of the twelve months
| |
| − |
| |
| − | elseif mw.ustring.match(date_string, patterns['Md-dy'][1]) then -- month-initial day range: month day–day, year; days are separated by endash
| |
| − | month, day, day2, anchor_year, year=mw.ustring.match(date_string, patterns['Md-dy'][1]);
| |
| − | if tonumber(day) >= tonumber(day2) then return false; end -- date range order is left to right: earlier to later; dates may not be the same;
| |
| − | month = get_month_number (month);
| |
| − | if 0 == month then return false; end -- return false if month text isn't one of the twelve months
| |
| − | month2=month; -- for metadata
| |
| − | year2=year;
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['dMy'][1]) then -- day-initial: day month year
| |
| − | day, month, anchor_year, year=mw.ustring.match(date_string, patterns['dMy'][1]);
| |
| − | month = get_month_number (month);
| |
| − | if 0 == month then return false; end -- return false if month text isn't one of the twelve months
| |
| − | | |
| − | --[[ NOT supported at en.wiki
| |
| − | elseif mw.ustring.match(date_string, patterns['yMd'][1]) then -- year-initial: year month day; day: 1 or 2 two digits, leading zero allowed
| |
| − | anchor_year, year, month, day=mw.ustring.match(date_string, patterns['yMd'][1]);
| |
| − | month = get_month_number (month);
| |
| − | if 0 == month then return false; end -- return false if month text isn't one of the twelve months
| |
| − | -- end NOT supported at en.wiki ]]
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['d-dMy'][1]) then -- day-range-initial: day–day month year; days are separated by endash
| |
| − | day, day2, month, anchor_year, year=mw.ustring.match(date_string, patterns['d-dMy'][1]);
| |
| − | if tonumber(day) >= tonumber(day2) then return false; end -- date range order is left to right: earlier to later; dates may not be the same;
| |
| − | month = get_month_number (month);
| |
| − | if 0 == month then return false; end -- return false if month text isn't one of the twelve months
| |
| − | month2=month; -- for metadata
| |
| − | year2=year;
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['dM-dMy'][1]) then -- day initial month-day-range: day month - day month year; uses spaced endash
| |
| − | day, month, day2, month2, anchor_year, year=mw.ustring.match(date_string, patterns['dM-dMy'][1]);
| |
| − | if (not is_valid_month_season_range(month, month2)) or not is_valid_year(year) then return false; end -- date range order is left to right: earlier to later;
| |
| − | month = get_month_number (month); -- for metadata
| |
| − | month2 = get_month_number (month2);
| |
| − | year2=year;
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['Md-Mdy'][1]) then -- month initial month-day-range: month day – month day, year; uses spaced endash
| |
| − | month, day, month2, day2, anchor_year, year=mw.ustring.match(date_string, patterns['Md-Mdy'][1]);
| |
| − | if (not is_valid_month_season_range(month, month2)) or not is_valid_year(year) then return false; end
| |
| − | month = get_month_number (month); -- for metadata
| |
| − | month2 = get_month_number (month2);
| |
| − | year2=year;
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['dMy-dMy'][1]) then -- day initial month-day-year-range: day month year - day month year; uses spaced endash
| |
| − | day, month, year, day2, month2, anchor_year, year2=mw.ustring.match(date_string, patterns['dMy-dMy'][1]);
| |
| − | if tonumber(year2) <= tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
| |
| − | if not is_valid_year(year2) or not is_valid_month_range_style(month, month2) then return false; end -- year2 no more than one year in the future; months same style
| |
| − | month = get_month_number (month); -- for metadata
| |
| − | month2 = get_month_number (month2);
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['Mdy-Mdy'][1]) then -- month initial month-day-year-range: month day, year – month day, year; uses spaced endash
| |
| − | month, day, year, month2, day2, anchor_year, year2=mw.ustring.match(date_string, patterns['Mdy-Mdy'][1]);
| |
| − | if tonumber(year2) <= tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
| |
| − | if not is_valid_year(year2) or not is_valid_month_range_style(month, month2) then return false; end -- year2 no more than one year in the future; months same style
| |
| − | month = get_month_number (month); -- for metadata
| |
| − | month2 = get_month_number (month2);
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['Sy4-y2'][1]) then -- special case Winter/Summer year-year (YYYY-YY); year separated with unspaced endash
| |
| − | local century;
| |
| − | month, year, century, anchor_year, year2=mw.ustring.match(date_string, patterns['Sy4-y2'][1]);
| |
| − | if 'Winter' ~= month and 'Summer' ~= month then return false end; -- 'month' can only be Winter or Summer
| |
| − | anchor_year=year..'–'..anchor_year; -- assemble anchor_year from both years
| |
| − | year2 = century..year2; -- add the century to year2 for comparisons
| |
| − | if 1 ~= tonumber(year2) - tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
| |
| − | if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
| |
| − | month = get_season_number (month);
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['Sy-y'][1]) then -- special case Winter/Summer year-year; year separated with unspaced endash
| |
| − | month, year, anchor_year, year2=mw.ustring.match(date_string, patterns['Sy-y'][1]);
| |
| − | if 'Winter' ~= month and 'Summer' ~= month then return false end; -- 'month' can only be Winter or Summer
| |
| − | anchor_year=year..'–'..anchor_year; -- assemble anchor_year from both years
| |
| − | if 1 ~= tonumber(year2) - tonumber(year) then return false; end -- must be sequential years, left to right, earlier to later
| |
| − | if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
| |
| − | month = get_season_number (month); -- for metadata
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['My-My'][1]) then -- month/season year - month/season year; separated by spaced endash
| |
| − | month, year, month2, anchor_year, year2=mw.ustring.match(date_string, patterns['My-My'][1]);
| |
| − | anchor_year=year..'–'..anchor_year; -- assemble anchor_year from both years
| |
| − | if tonumber(year) >= tonumber(year2) then return false; end -- left to right, earlier to later, not the same
| |
| − | if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
| |
| − | if 0 ~= get_month_number(month) and 0 ~= get_month_number(month2) and is_valid_month_range_style(month, month2) then -- both must be month year, same month style
| |
| − | month = get_month_number(month);
| |
| − | month2 = get_month_number(month2);
| |
| − | elseif 0 ~= get_season_number(month) and 0 ~= get_season_number(month2) then -- both must be or season year, not mixed
| |
| − | month = get_season_number(month);
| |
| − | month2 = get_season_number(month2);
| |
| − | else
| |
| − | return false;
| |
| − | end
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['M-My'][1]) then -- month/season range year; months separated by endash
| |
| − | month, month2, anchor_year, year=mw.ustring.match(date_string, patterns['M-My'][1]);
| |
| − | if (not is_valid_month_season_range(month, month2)) or (not is_valid_year(year)) then return false; end
| |
| − | if 0 ~= get_month_number(month) then -- determined to be a valid range so just check this one to know if month or season
| |
| − | month = get_month_number(month);
| |
| − | month2 = get_month_number(month2);
| |
| − | else
| |
| − | month = get_season_number(month);
| |
| − | month2 = get_season_number(month2);
| |
| − | end
| |
| − | year2=year;
| |
| − |
| |
| − | elseif mw.ustring.match(date_string, patterns['My'][1]) then -- month/season year or proper-name year
| |
| − | month, anchor_year, year=mw.ustring.match(date_string, patterns['My'][1]);
| |
| − | if not is_valid_year(year) then return false; end
| |
| − | if not is_valid_month_or_season (month) and 0 == is_proper_name (month) then return false; end
| |
| − | if 0 ~= get_month_number(month) then -- determined to be a valid range so just check this one to know if month or season
| |
| − | month = get_month_number(month);
| |
| − | elseif 0 ~= get_season_number(month) then
| |
| − | month = get_season_number(month);
| |
| − | else
| |
| − | month = is_proper_name (month); -- must be proper name; not supported in COinS
| |
| − | end
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['y-y'][1]) then -- Year range: YYY-YYY or YYY-YYYY or YYYY–YYYY; separated by unspaced endash; 100-9999
| |
| − | year, anchor_year, year2=mw.ustring.match(date_string, patterns['y-y'][1]);
| |
| − | anchor_year=year..'–'..anchor_year; -- assemble anchor year from both years
| |
| − | if tonumber(year) >= tonumber(year2) then return false; end -- left to right, earlier to later, not the same
| |
| − | if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
| |
| − | | |
| − | elseif mw.ustring.match(date_string, patterns['y4-y2'][1]) then -- Year range: YYYY–YY; separated by unspaced endash
| |
| − | local century;
| |
| − | year, century, anchor_year, year2=mw.ustring.match(date_string, patterns['y4-y2'][1]);
| |
| − | anchor_year=year..'–'..anchor_year; -- assemble anchor year from both years
| |
| − | if 13 > tonumber(year2) then return false; end -- don't allow 2003-05 which might be May 2003
| |
| − | year2 = century..year2; -- add the century to year2 for comparisons
| |
| − | if tonumber(year) >= tonumber(year2) then return false; end -- left to right, earlier to later, not the same
| |
| − | if not is_valid_year(year2) then return false; end -- no year farther in the future than next year
| |
| − | | |
| − | elseif date_string:match (patterns['y'][1]) then -- year; here accept either YYY or YYYY
| |
| − | anchor_year, year=date_string:match (patterns['y'][1]);
| |
| − | if false == is_valid_year(year) then
| |
| − | return false;
| |
| − | end
| |
| − | | |
| − | else
| |
| − | return false; -- date format not one of the MOS:DATE approved formats
| |
| − | end
| |
| − | | |
| − | if test_accessdate then -- test accessdate here because we have numerical date parts
| |
| − | if 0 ~= year and 0 ~= month and 0 ~= day and -- all parts of a single date required
| |
| − | 0 == year2 and 0 == month2 and 0 == day2 then -- none of these; accessdate must not be a range
| |
| − | if not is_valid_accessdate (year..'-'..month..'-'..day) then
| |
| − | return false; -- return false when accessdate out of bounds
| |
| − | end
| |
| − | else
| |
| − | return false; -- return false when accessdate is a range of two dates
| |
| − | end
| |
| − | end
| |
| − | | |
| − | local result=true; -- check whole dates for validity; assume true because not all dates will go through this test
| |
| − | if 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 == month2 and 0 == day2 then -- YMD (simple whole date)
| |
| − | result=is_valid_date(year,month,day);
| |
| − | | |
| − | elseif 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 == month2 and 0 ~= day2 then -- YMD-d (day range)
| |
| − | result=is_valid_date(year,month,day);
| |
| − | result=result and is_valid_date(year,month,day2);
| |
| − | | |
| − | elseif 0 ~= year and 0 ~= month and 0 ~= day and 0 == year2 and 0 ~= month2 and 0 ~= day2 then -- YMD-md (day month range)
| |
| − | result=is_valid_date(year,month,day);
| |
| − | result=result and is_valid_date(year,month2,day2);
| |
| − | | |
| − | elseif 0 ~= year and 0 ~= month and 0 ~= day and 0 ~= year2 and 0 ~= month2 and 0 ~= day2 then -- YMD-ymd (day month year range)
| |
| − | result=is_valid_date(year,month,day);
| |
| − | result=result and is_valid_date(year2,month2,day2);
| |
| − | end
| |
| − |
| |
| − | if false == result then return false; end
| |
| − | | |
| − | if nil ~= tCOinS_date then -- this table only passed into this function when testing |date= parameter values
| |
| − | make_COinS_date ({year=year, month=month, day=day, year2=year2, month2=month2, day2=day2}, tCOinS_date); -- make an ISO 8601 date string for COinS
| |
| − | end
| |
| − |
| |
| − | return true, anchor_year; -- format is good and date string represents a real date
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< D A T E S >--------------------------------------------------------------------
| |
| − | | |
| − | Cycle the date-holding parameters in passed table date_parameters_list through check_date() to check compliance with MOS:DATE. For all valid dates, check_date() returns
| |
| − | true. The |date= parameter test is unique, it is the only date holding parameter from which values for anchor_year (used in CITEREF identifiers) and COinS_date (used in
| |
| − | the COinS metadata) are derived. The |date= parameter is the only date-holding parameter that is allowed to contain the no-date keywords "n.d." or "nd" (without quotes).
| |
| − | | |
| − | Unlike most error messages created in this module, only one error message is created by this function. Because all of the date holding parameters are processed serially,
| |
| − | a single error message is created as the dates are tested.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function dates(date_parameters_list, tCOinS_date)
| |
| − | local anchor_year; -- will return as nil if the date being tested is not |date=
| |
| − | local COinS_date; -- will return as nil if the date being tested is not |date=
| |
| − | local embargo_date; -- if embargo date is a good dmy, mdy, ymd date then holds original value else reset to 9999
| |
| − | local error_message = "";
| |
| − | local good_date = false;
| |
| − |
| |
| − | for k, v in pairs(date_parameters_list) do -- for each date-holding parameter in the list
| |
| − | if is_set(v.val) then -- if the parameter has a value
| |
| − | v.val = mw.ustring.gsub (v.val, '%d', cfg.date_names.local_digits); -- translate 'local' digits to Western 0-9
| |
| − | if v.val:match("^c%. [1-9]%d%d%d?%a?$") then -- special case for c. year or with or without CITEREF disambiguator - only |date= and |year=
| |
| − | local year = v.val:match("c%. ([1-9]%d%d%d?)%a?"); -- get the year portion so it can be tested
| |
| − | if 'date'==k then
| |
| − | anchor_year, COinS_date = v.val:match("((c%. [1-9]%d%d%d?)%a?)"); -- anchor year and COinS_date only from |date= parameter
| |
| − | good_date = is_valid_year(year);
| |
| − | elseif 'year'==k then
| |
| − | good_date = is_valid_year(year);
| |
| − | end
| |
| − | elseif 'date'==k then -- if the parameter is |date=
| |
| − | if v.val:match("^n%.d%.%a?$") then -- if |date=n.d. with or without a CITEREF disambiguator
| |
| − | good_date, anchor_year, COinS_date = true, v.val:match("((n%.d%.)%a?)"); --"n.d."; no error when date parameter is set to no date
| |
| − | elseif v.val:match("^nd%a?$") then -- if |date=nd with or without a CITEREF disambiguator
| |
| − | good_date, anchor_year, COinS_date = true, v.val:match("((nd)%a?)"); --"nd"; no error when date parameter is set to no date
| |
| − | else
| |
| − | good_date, anchor_year, COinS_date = check_date (v.val, tCOinS_date); -- go test the date
| |
| − | end
| |
| − | elseif 'year'==k then -- if the parameter is |year= it should hold only a year value
| |
| − | if v.val:match("^[1-9]%d%d%d?%a?$") then -- if |year= 3 or 4 digits only with or without a CITEREF disambiguator
| |
| − | good_date, anchor_year, COinS_date = true, v.val:match("((%d+)%a?)");
| |
| − | end
| |
| − | elseif 'access-date'==k then -- if the parameter is |date=
| |
| − | good_date = check_date (v.val, nil, true); -- go test the date; nil is a placeholder; true is the test_accessdate flag
| |
| − | elseif 'embargo'==k then -- if the parameter is |embargo=
| |
| − | good_date = check_date (v.val); -- go test the date
| |
| − | if true == good_date then -- if the date is a valid date
| |
| − | good_date, embargo_date = is_valid_embargo_date (v.val); -- is |embargo= date a single dmy, mdy, or ymd formatted date? yes:returns embargo; no: returns 9999
| |
| − | end
| |
| − | else -- any other date-holding parameter
| |
| − | good_date = check_date (v.val); -- go test the date
| |
| − | end
| |
| − | if false==good_date then -- assemble one error message so we don't add the tracking category multiple times
| |
| − | if is_set(error_message) then -- once we've added the first portion of the error message ...
| |
| − | error_message=error_message .. ", "; -- ... add a comma space separator
| |
| − | end
| |
| − | error_message=error_message .. "|" .. v.name .. "="; -- add the failed parameter
| |
| − | end
| |
| − | end
| |
| − | end
| |
| − | return anchor_year, embargo_date, error_message; -- and done
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< Y E A R _ D A T E _ C H E C K >------------------------------------------------
| |
| − | | |
| − | Compare the value provided in |year= with the year value(s) provided in |date=. This function returns a numeric value:
| |
| − | 0 - year value does not match the year value in date
| |
| − | 1 - (default) year value matches the year value in date or one of the year values when date contains two years
| |
| − | 2 - year value matches the year value in date when date is in the form YYYY-MM-DD and year is disambiguated (|year=YYYYx)
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function year_date_check (year_string, date_string)
| |
| − | local year;
| |
| − | local date1;
| |
| − | local date2;
| |
| − | local result = 1; -- result of the test; assume that the test passes
| |
| − |
| |
| − | year = year_string:match ('(%d%d%d%d?)');
| |
| − | | |
| − | if date_string:match ('%d%d%d%d%-%d%d%-%d%d') and year_string:match ('%d%d%d%d%a') then --special case where both date and year are required YYYY-MM-DD and YYYYx
| |
| − | date1 = date_string:match ('(%d%d%d%d)');
| |
| − | year = year_string:match ('(%d%d%d%d)');
| |
| − | if year ~= date1 then
| |
| − | result = 0; -- years don't match
| |
| − | else
| |
| − | result = 2; -- years match; but because disambiguated, don't add to maint cat
| |
| − | end
| |
| − |
| |
| − | elseif date_string:match ("%d%d%d%d?.-%d%d%d%d?") then -- any of the standard range formats of date with two three- or four-digit years
| |
| − | date1, date2 = date_string:match ("(%d%d%d%d?).-(%d%d%d%d?)");
| |
| − | if year ~= date1 and year ~= date2 then
| |
| − | result = 0;
| |
| − | end
| |
| − | | |
| − | elseif mw.ustring.match(date_string, "%d%d%d%d[%-–]%d%d") then -- YYYY-YY date ranges
| |
| − | local century;
| |
| − | date1, century, date2 = mw.ustring.match(date_string, "((%d%d)%d%d)[%-–]+(%d%d)");
| |
| − | date2 = century..date2; -- convert YY to YYYY
| |
| − | if year ~= date1 and year ~= date2 then
| |
| − | result = 0;
| |
| − | end
| |
| − | | |
| − | elseif date_string:match ("%d%d%d%d?") then -- any of the standard formats of date with one year
| |
| − | date1 = date_string:match ("(%d%d%d%d?)");
| |
| − | if year ~= date1 then
| |
| − | result = 0;
| |
| − | end
| |
| − | else
| |
| − | result = 0; -- no recognizable year in date
| |
| − | end
| |
| − | return result;
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< R E F O R M A T T E R >--------------------------------------------------------
| |
| − | | |
| − | reformat 'date' into new format specified by format_param if pattern_idx (the current format of 'date') can be
| |
| − | reformatted. Does the grunt work for reformat_dates().
| |
| − | | |
| − | The table re_formats maps patern_idx (current format) and format_param (desired format) to a table that holds:
| |
| − | format string used by string.format()
| |
| − | identifier letters ('d', 'm', 'y', 'd2', 'm2', 'y2') that serve as indexes into a table t{} that holds captures
| |
| − | from mw.ustring.match() for the various date parts specified by patterns[pattern_idx][1]
| |
| − | | |
| − | Items in patterns{} have the general form:
| |
| − | ['ymd'] = {'^(%d%d%d%d)%-(%d%d)%-(%d%d)$', 'y', 'm', 'd'}, where:
| |
| − | ['ymd'] is pattern_idx
| |
| − | patterns['ymd'][1] is the match pattern with captures for mw.ustring.match()
| |
| − | patterns['ymd'][2] is an indicator letter identifying the content of the first capture
| |
| − | patterns['ymd'][3] ... the second capture etc
| |
| − | | |
| − | when a pattern matches a date, the captures are loaded into table t{} in capture order using the idemtifier
| |
| − | characters as indexes into t{} For the above, a ymd date is in t{} as:
| |
| − | t.y = first capture (year), t.m = second capture (month), t.d = third capture (day)
| |
| − | | |
| − | To reformat, this function is called with the pattern_idx that matches the current format of the date and with
| |
| − | format_param set to the desired format. This function loads table t{} as described and then calls string.format()
| |
| − | with the format string specified by re_format[pattern_idx][format_param][1] using values taken from t{} according
| |
| − | to the capture identifier letters specified by patterns[pattern_idx][format_param][n] where n is 2..
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local re_formats = {
| |
| − | ['ymd'] = { -- date format is ymd; reformat to:
| |
| − | ['mdy'] = {'%s %s, %s', 'm', 'd', 'y'}, -- |df=mdy
| |
| − | ['dmy'] = {'%s %s %s', 'd', 'm', 'y'}, -- |df=dmy
| |
| − | -- ['yMd'] = {'%s %s %s', 'y', 'm', 'd'}, -- |df=yMd; not supported at en.wiki
| |
| − | },
| |
| − | ['Mdy'] = { -- date format is Mdy; reformat to:
| |
| − | ['mdy'] = {'%s %s, %s', 'm', 'd', 'y'}, -- for long/short reformatting
| |
| − | ['dmy'] = {'%s %s %s', 'd', 'm', 'y'}, -- |df=dmy
| |
| − | ['ymd'] = {'%s-%s-%s', 'y', 'm', 'd'}, -- |df=ymd
| |
| − | -- ['yMd'] = {'%s %s %s', 'y', 'm', 'd'}, -- |df=yMd; not supported at en.wiki
| |
| − | },
| |
| − | ['dMy'] = { -- date format is dMy; reformat to:
| |
| − | ['dmy'] = {'%s %s %s', 'd', 'm', 'y'}, -- for long/short reformatting
| |
| − | ['mdy'] = {'%s %s, %s', 'm', 'd', 'y'}, -- |df=mdy
| |
| − | ['ymd'] = {'%s-%s-%s', 'y', 'm', 'd'}, -- |df=ymd
| |
| − | -- ['yMd'] = {'%s %s %s', 'y', 'm', 'd'}, -- |df=yMd; not supported at en.wiki
| |
| − | },
| |
| − | ['Md-dy'] = { -- date format is Md-dy; reformat to:
| |
| − | ['mdy'] = {'%s %s–%s, %s', 'm', 'd', 'd2', 'y'}, -- for long/short reformatting
| |
| − | ['dmy'] = {'%s–%s %s %s', 'd', 'd2', 'm', 'y'}, -- |df=dmy -> d-dMy
| |
| − | },
| |
| − | ['d-dMy'] = { -- date format is d-d>y; reformat to:
| |
| − | ['dmy'] = {'%s–%s %s %s', 'd', 'd2', 'm', 'y'}, -- for long/short reformatting
| |
| − | ['mdy'] = {'%s %s–%s, %s', 'm', 'd', 'd2', 'y'}, -- |df=mdy -> Md-dy
| |
| − | },
| |
| − | ['dM-dMy'] = { -- date format is dM-dMy; reformat to:
| |
| − | ['dmy'] = {'%s %s – %s %s %s', 'd', 'm', 'd2', 'm2', 'y'}, -- for long/short reformatting
| |
| − | ['mdy'] = {'%s %s – %s %s, %s', 'm', 'd', 'm2', 'd2', 'y'}, -- |df=mdy -> Md-Mdy
| |
| − | },
| |
| − | ['Md-Mdy'] = { -- date format is Md-Mdy; reformat to:
| |
| − | ['mdy'] = {'%s %s – %s %s, %s', 'm', 'd', 'm2', 'd2', 'y'}, -- for long/short reformatting
| |
| − | ['dmy'] = {'%s %s – %s %s %s', 'd', 'm', 'd2', 'm2', 'y'}, -- |df=dmy -> dM-dMy
| |
| − | },
| |
| − | ['dMy-dMy'] = { -- date format is dMy-dMy; reformat to:
| |
| − | ['dmy'] = {'%s %s %s – %s %s %s', 'd', 'm', 'y', 'd2', 'm2', 'y2'}, -- for long/short reformatting
| |
| − | ['mdy'] = {'%s %s, %s – %s %s, %s', 'm', 'd', 'y', 'm2', 'd2', 'y2'}, -- |df=mdy -> Mdy-Mdy
| |
| − | },
| |
| − | ['Mdy-Mdy'] = { -- date format is Mdy-Mdy; reformat to:
| |
| − | ['mdy'] = {'%s %s, %s – %s %s, %s', 'm', 'd', 'y', 'm2', 'd2', 'y2'}, -- for long/short reformatting
| |
| − | ['dmy'] = {'%s %s %s – %s %s %s', 'd', 'm', 'y', 'd2', 'm2', 'y2'}, -- |df=dmy -> dMy-dMy
| |
| − | },
| |
| − | ['My-My'] = { -- these for long/short reformatting
| |
| − | ['any'] = {'%s %s – %s %s', 'm', 'y', 'm2', 'y2'}, -- dmy/mdy agnostic
| |
| − | },
| |
| − | ['M-My'] = { -- these for long/short reformatting
| |
| − | ['any'] = {'%s–%s %s', 'm', 'm2', 'y'}, -- dmy/mdy agnostic
| |
| − | },
| |
| − | ['My'] = { -- these for long/short reformatting
| |
| − | ['any'] = {'%s %s', 'm', 'y'}, -- dmy/mdy agnostic
| |
| − | },
| |
| − | -- ['yMd'] = { -- not supported at en.wiki
| |
| − | -- ['mdy'] = {'%s %s, %s', 'm', 'd', 'y'}, -- |df=mdy
| |
| − | -- ['dmy'] = {'%s %s %s', 'd', 'm', 'y'}, -- |df=dmy
| |
| − | -- ['ymd'] = {'%s-%s-%s', 'y', 'm', 'd'}, -- |df=ymd
| |
| − | -- },
| |
| − | }
| |
| − | | |
| − | | |
| − | local function reformatter (date, pattern_idx, format_param, mon_len)
| |
| − | if not in_array (pattern_idx, {'ymd', 'Mdy', 'Md-dy', 'dMy', 'yMd', 'd-dMy', 'dM-dMy', 'Md-Mdy', 'dMy-dMy', 'Mdy-Mdy', 'My-My', 'M-My', 'My'}) then
| |
| − | return; -- not in this set of date format patterns then not a reformattable date
| |
| − | end
| |
| − |
| |
| − | if 'ymd' == format_param and in_array (pattern_idx, {'ymd', 'Md-dy', 'd-dMy', 'dM-dMy', 'Md-Mdy', 'dMy-dMy', 'Mdy-Mdy', 'My-My', 'M-My', 'My'}) then
| |
| − | return; -- ymd date ranges not supported at en.wiki; no point in reformatting ymd to ymd
| |
| − | end
| |
| − | | |
| − | if in_array (pattern_idx, {'My', 'M-My', 'My-My'}) then -- these are not dmy/mdy so can't be 'reformatted' into either
| |
| − | format_param = 'any'; -- so format-agnostic
| |
| − | end
| |
| − | | |
| − | -- if 'yMd' == format_param and in_array (pattern_idx, {'yMd', 'Md-dy', 'd-dMy', 'dM-dMy', 'Md-Mdy', 'dMy-dMy', 'Mdy-Mdy'}) then -- not supported at en.wiki
| |
| − | if 'yMd' == format_param then -- not supported at en.wiki
| |
| − | return; -- not a reformattable date
| |
| − | end
| |
| − |
| |
| − | local c1, c2, c3, c4, c5, c6, c7; -- these hold the captures specified in patterns[pattern_idx][1]
| |
| − | c1, c2, c3, c4, c5, c6, c7 = mw.ustring.match (date, patterns[pattern_idx][1]); -- get the captures
| |
| − | | |
| − | local t = { -- table that holds k/v pairs of date parts from the captures and patterns[pattern_idx][2..]
| |
| − | [patterns[pattern_idx][2]] = c1; -- at minimum there is always one capture with a matching indicator letter
| |
| − | [patterns[pattern_idx][3] or 'x'] = c2; -- patterns can have a variable number of captures; each capture requires an indicator letter;
| |
| − | [patterns[pattern_idx][4] or 'x'] = c3; -- where there is no capture, there is no indicator letter so n in patterns[pattern_idx][n] will be nil;
| |
| − | [patterns[pattern_idx][5] or 'x'] = c4; -- the 'x' here spoofs an indicator letter to prevent 'table index is nil' error
| |
| − | [patterns[pattern_idx][6] or 'x'] = c5;
| |
| − | [patterns[pattern_idx][7] or 'x'] = c6;
| |
| − | [patterns[pattern_idx][8] or 'x'] = c7;
| |
| − | };
| |
| − | | |
| − | if tonumber(t.m) then -- if raw month is a number (converting from ymd)
| |
| − | if 's' == mon_len then -- if we are to use abbreviated month names
| |
| − | t.m = cfg.date_names['inv_local_s'][tonumber(t.m)]; -- convert it to a month name
| |
| − | else
| |
| − | t.m = cfg.date_names['inv_local_l'][tonumber(t.m)]; -- convert it to a month name
| |
| − | end
| |
| − | t.d = t.d:gsub ('0(%d)', '%1'); -- strip leading '0' from day if present
| |
| − | elseif 'ymd' == format_param then -- when converting to ymd
| |
| − | if 1582 > tonumber(t.y) then -- ymd format dates not allowed before 1582
| |
| − | return;
| |
| − | end
| |
| − | t.m = string.format ('%02d', get_month_number (t.m)); -- make sure that month and day are two digits
| |
| − | t.d = string.format ('%02d', t.d);
| |
| − | elseif mon_len then -- if mon_len is set to either 'short' or 'long'
| |
| − | for _, mon in ipairs ({'m', 'm2'}) do -- because there can be two month names, check both
| |
| − | if t[mon] then
| |
| − | t[mon] = get_month_number (t[mon]); -- get the month number for this month (is length agnostic)
| |
| − | if 0 == t[mon] then return; end -- seasons and named dates can't be converted
| |
| − | t[mon] = (('s' == mon_len) and cfg.date_names['inv_local_s'][t[mon]]) or cfg.date_names['inv_local_l'][t[mon]]; -- fetch month name according to length
| |
| − | end
| |
| − | end
| |
| − | end
| |
| − | | |
| − | local new_date = string.format (re_formats[pattern_idx][format_param][1], -- format string
| |
| − | t[re_formats[pattern_idx][format_param][2]], -- named captures from t{}
| |
| − | t[re_formats[pattern_idx][format_param][3]],
| |
| − | t[re_formats[pattern_idx][format_param][4]],
| |
| − | t[re_formats[pattern_idx][format_param][5]],
| |
| − | t[re_formats[pattern_idx][format_param][6]],
| |
| − | t[re_formats[pattern_idx][format_param][7]],
| |
| − | t[re_formats[pattern_idx][format_param][8]]
| |
| − | );
| |
| − | | |
| − | return new_date;
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[-------------------------< R E F O R M A T _ D A T E S >--------------------------------------------------
| |
| − | | |
| − | Reformats existing dates into the format specified by format.
| |
| − | | |
| − | format is one of several manual keywords: dmy, dmy-all, mdy, mdy-all, ymd, ymd-all. The -all version includes
| |
| − | access- and archive-dates; otherwise these dates are not reformatted.
| |
| − | | |
| − | This function allows automatic date formatting. In ~/Configuration, the article source is searched for one of
| |
| − | the {{use xxx dates}} templates. If found, xxx becomes the global date format as xxx-all. If |cs1-dates= in
| |
| − | {{use xxx dates}} has legitimate value then that value determines how cs1|2 dates will be rendered. Legitimate
| |
| − | values for |cs1-dates= are:
| |
| − | l - all dates are rendered with long month names
| |
| − | ls - publication dates use long month names; access-/archive-dates use abbreviated month names
| |
| − | ly - publication dates use long month names; access-/archive-dates rendered in ymd format
| |
| − | s - all dates are rendered with abbreviated (short) month names
| |
| − | sy - publication dates use abbreviated month names; access-/archive-dates rendered in ymd format
| |
| − | y - all dates are rendered in ymd format
| |
| − | | |
| − | the format argument for automatic date formatting will be the format specified by {{use xxx dates}} with the
| |
| − | value supplied by |cs1-dates so one of: xxx-l, xxx-ls, xxx-ly, xxx-s, xxx-sy, xxx-y, or simply xxx (|cs1-dates=
| |
| − | empty, omitted, or invalid) where xxx shall be either of dmy or mdy.
| |
| − | | |
| − | dates are extracted from date_parameters_list, reformatted (if appropriate), and then written back into the
| |
| − | list in the new format. Dates in date_parameters_list are presumed here to be valid (no errors). This function
| |
| − | returns true when a date has been reformatted, false else. Actual reformatting is done by reformatter().
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function reformat_dates (date_parameters_list, format)
| |
| − | local all = false; -- set to false to skip access- and archive-dates
| |
| − | local len_p = 'l'; -- default publication date length shall be long
| |
| − | local len_a = 'l'; -- default access-/archive-date length shall be long
| |
| − | local result = false;
| |
| − | local new_date;
| |
| − |
| |
| − | if format:match('%a+%-all') then -- manual df keyword; auto df keyword when length not specified in {{use xxx dates}};
| |
| − | format = format:match('(%a+)%-all'); -- extract the format
| |
| − | all = true; -- all dates are long format dates because this keyword doesn't specify length
| |
| − | elseif format:match('%a+%-[lsy][sy]?') then -- auto df keywords; internal only
| |
| − | all = true; -- auto df applies to all dates; use length specified by capture len_p for all dates
| |
| − | format, len_p, len_a = format:match('(%a+)%-([lsy])([sy]?)'); -- extract the format and length keywords
| |
| − | if 'y' == len_p then -- because allowed by MOS:DATEUNIFY (sort of) range dates and My dates not reformatted
| |
| − | format = 'ymd'; -- override {{use xxx dates}}
| |
| − | elseif (not is_set(len_a)) or (len_p == len_a) then -- no access-/archive-date length specified or same length as publication dates then
| |
| − | len_a = len_p; -- in case len_a not set
| |
| − | end
| |
| − | end -- else only publication dates and they are long
| |
| − | | |
| − | for param_name, param_val in pairs (date_parameters_list) do -- for each date-holding parameter in the list
| |
| − | if is_set (param_val.val) then -- if the parameter has a value
| |
| − | if not (not all and in_array (param_name, {'access-date', 'archive-date'})) then -- skip access- or archive-date unless format is xxx-all; yeah, ugly; TODO: find a better way
| |
| − | for pattern_idx, pattern in pairs (patterns) do
| |
| − | if mw.ustring.match (param_val.val, pattern[1]) then
| |
| − | if all and in_array (param_name, {'access-date', 'archive-date'}) then -- if this date is an access- or archive-date
| |
| − | new_date = reformatter (param_val.val, pattern_idx, (('y' == len_a) and 'ymd') or format, len_a); -- choose ymd or dmy/mdy according to len_a setting
| |
| − | else -- all other dates
| |
| − | new_date = reformatter (param_val.val, pattern_idx, format, len_p);
| |
| − | end
| |
| − |
| |
| − | if new_date then -- set when date was reformatted
| |
| − | date_parameters_list[param_name].val = new_date; -- update date in date list
| |
| − | result = true; -- and announce that changes have been made
| |
| − | end
| |
| − | end -- if
| |
| − | end -- for
| |
| − | end -- if
| |
| − | end -- if
| |
| − | end -- for
| |
| − | return result; -- declare boolean result and done
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< D A T E _ H Y P H E N _ T O _ D A S H >----------------------------------------
| |
| − | | |
| − | Loops through the list of date-holding parameters and converts any hyphen to an ndash. Not called if the cs1|2
| |
| − | template has any date errors.
| |
| − | | |
| − | Modifies the date_parameters_list and returns true if hyphens are replaced, else returns false.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function date_hyphen_to_dash (date_parameters_list)
| |
| − | local result = false;
| |
| − | local n;
| |
| − | for param_name, param_val in pairs(date_parameters_list) do -- for each date-holding parameter in the list
| |
| − | if is_set (param_val.val) then
| |
| − | if not mw.ustring.match (param_val.val, '%d%d%d%d%-%d%d%-%d%d') then -- for those that are not ymd dates (ustring because here digits may not be western)
| |
| − | param_val.val, n = param_val.val:gsub ('%-', '–'); -- replace any hyphen with ndash
| |
| − | if 0 ~= n then
| |
| − | date_parameters_list[param_name].val = param_val.val; -- update the list
| |
| − | result = true;
| |
| − | end
| |
| − | end
| |
| − | end
| |
| − | end
| |
| − | return result; -- so we know if any hyphens were replaced
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[-------------------------< D A T E _ N A M E _ X L A T E >------------------------------------------------
| |
| − | | |
| − | Attempts to translate English month names to local-language month names using names supplied by MediaWiki's
| |
| − | date parser function. This is simple name-for-name replacement and may not work for all languages.
| |
| − | | |
| − | if xlat_dig is true, this function will also translate western (English) digits to the local language's digits.
| |
| − | This will also translate ymd dates.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function date_name_xlate (date_parameters_list, xlt_dig)
| |
| − | local xlate;
| |
| − | local mode; -- long or short month names
| |
| − | local modified = false;
| |
| − | local date;
| |
| − |
| |
| − | for param_name, param_val in pairs(date_parameters_list) do -- for each date-holding parameter in the list
| |
| − | if is_set(param_val.val) then -- if the parameter has a value
| |
| − | date = param_val.val;
| |
| − | for month in mw.ustring.gmatch (date, '%a+') do -- iterate through all dates in the date (single date or date range)
| |
| − | if cfg.date_names.en.long[month] then
| |
| − | mode = 'F'; -- English name is long so use long local name
| |
| − | elseif cfg.date_names.en.short[month] then
| |
| − | mode = 'M'; -- English name is short so use short local name
| |
| − | else
| |
| − | mode = nil; -- not an English month name; could be local language month name or an English season name
| |
| − | end
| |
| − |
| |
| − | if mode then -- might be a season
| |
| − | xlate = mw.getContentLanguage():formatDate(mode, '1' .. month); -- translate the month name to this local language
| |
| − | date = mw.ustring.gsub (date, month, xlate); -- replace the English with the translation
| |
| − | date_parameters_list[param_name].val = date; -- save the translated date
| |
| − | modified = true;
| |
| − | end
| |
| − | end
| |
| − | | |
| − | if xlt_dig then -- shall we also translate digits?
| |
| − | date = date:gsub ('%d', cfg.date_names.xlate_digits); -- translate digits from western to 'local digits'
| |
| − | date_parameters_list[param_name].val = date; -- save the translated date
| |
| − | modified = true;
| |
| − | end
| |
| − | end
| |
| − | end
| |
| − |
| |
| − | return modified;
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< S E T _ S E L E C T E D _ M O D U L E S >--------------------------------------
| |
| − | | |
| − | Sets local imported functions table to same (live or sandbox) as that used by the other modules.
| |
| − | | |
| − | ]]
| |
| − | | |
| − | local function set_selected_modules (cfg_table_ptr, utilities_page_ptr)
| |
| − | is_set = utilities_page_ptr.is_set; -- import functions from selected Module:Citation/CS1/Utilities module
| |
| − | in_array = utilities_page_ptr.in_array; -- import functions from selected Module:Citation/CS1/Utilities module
| |
| − | cfg = cfg_table_ptr; -- import tables from selected Module:Citation/CS1/Configuration
| |
| − | end
| |
| − | | |
| − | | |
| − | --[[--------------------------< E X P O R T E D F U N C T I O N S >------------------------------------------
| |
| − | ]]
| |
| − | | |
| − | return { -- return exported functions
| |
| − | dates = dates,
| |
| − | year_date_check = year_date_check,
| |
| − | reformat_dates = reformat_dates,
| |
| − | date_hyphen_to_dash = date_hyphen_to_dash,
| |
| − | date_name_xlate = date_name_xlate,
| |
| − | set_selected_modules = set_selected_modules
| |
| − | }
| |
.svg){kind=small}
Azərbaycan SSR, 
ZSFSR
Azərbaycan
SSRİ→
